Best Renewable Design for Unidirectional Carbon Fiber - Plastic reinforcement chopped carbon fiber – WANHOO Manufacturer and Factory

Renewable Design for Unidirectional Carbon Fiber - Plastic reinforcement chopped carbon fiber – WANHOO

short description:

Product Detail

Product Tags

Feedback (2)

With our abundant experience and considerate products and services, we have been recognized to be a reputable supplier for a lot of global consumers for 2x2 Twill Carbon Fiber, Continuous Fiber Reinforced Thermoplastic Composites, Plain Carbon Fiber, We, with great passion and faithfulness, are willing to provide you with perfect services and striding forward with you to create a bright future.

Renewable Design for Unidirectional Carbon Fiber - Plastic reinforcement chopped carbon fiber – WANHOO Detail:

Chopped carbon fiber

The carbon fiber chopped strand are based on the polyacrylonitrile fiber as the raw material. Via carbonization, special surface treatment, mechanical grinding, sieving and drying.
It is stable, electrical conductive, self-lubricating and reinforcing. Because of that It can composite with resin ,plastic, metal, rubber and so on. So It can reinforce the strength and wear resistance of the materials.

Chopped carbon fiber
It can also be commonly compounded with general engineering thermoplastics (e.g., PC, Nylon, etc.) and high-temperature thermoplastic resins (e.g, PEEK, PEI, etc.), the resulting composite offers industry-leading high strength-to-weight and stiffness-to-weight ratios.

Now It is used in many fields. For examples: Electronic chips, conducting plate, conducting floor, Electronic machinery, anti-static industries, anti-static filter, defense industry, building insulation, chemical.

CFRP are composite materials. In this case the composite consists of two parts: a matrix and a reinforcement. In CFRP the reinforcement is carbon fiber, which provides its strength. The matrix is usually a polymer resin, such as epoxy, to bind the reinforcements together. Because CFRP consists of two distinct elements, the material properties depend on these two elements.
Reinforcement gives CFRP its strength and rigidity, measured by stress and elastic modulus respectively. Unlike isotropic materials like steel and aluminum, CFRP has directional strength properties. The properties of CFRP depend on the layouts of the carbon fiber and the proportion of the carbon fibers relative to the polymer. The two different equations governing the net elastic modulus of composite materials using the properties of the carbon fibers and the polymer matrix can also be applied to carbon fiber reinforced plastics
below is the our products in the application of carbon fiber reinforced plastics

Thermoplastic carbon fiber particles with PI/ PEEK

Advantage：High strength, high modulus, electrical conductivity
Usage: EMI shielding, Antistatic, reinforcement the engineering plastic

Chopped carbon fiber

Material	Carbon fiber & PI/PEEK
Carbon fiber Content (%)	97%
PI/PEEK content(%)	2.5-3
Water Content(%)	<0.3
Length	6mm
Thermal stability of surface treatment	350℃ - 450 ℃
Recommended use	Nylon6/66, PPO, PPS, PEI, PES, PPA, PEEK, PA10T, PEKK, PPS，PC, PI, PEEK

Product detail pictures:

Related Product Guide:

Sticking to the perception of "Creating products of top of the range and earning mates with people today from all over the world", we constantly put the desire of consumers in the first place for Renewable Design for Unidirectional Carbon Fiber - Plastic reinforcement chopped carbon fiber – WANHOO , The product will supply to all over the world, such as: South Korea, El Salvador, Rome, We adopted technique and quality system management, based on "customer orientated, reputation first, mutual benefit, develop with joint efforts", welcome friends to communicate and cooperate from all over the world.

0.5 Mm Carbon Fibre Sheet