Best OEM Supply Carbon Fiber Plate - Plastic reinforcement chopped carbon fiber – WANHOO Manufacturer and Factory

OEM Supply Carbon Fiber Plate - Plastic reinforcement chopped carbon fiber – WANHOO

short description:

Product Detail

Product Tags

Feedback (2)

Our target is always to satisfy our customers by offering golden support, superior value and high quality for Unidirectional Cfrp, Carbon Sheet 2mm, 8mm Carbon Fiber Tube, Standing still today and looking into the future, we sincerely welcome customers all over the world to cooperate with us.

OEM Supply Carbon Fiber Plate - Plastic reinforcement chopped carbon fiber – WANHOO Detail:

Chopped carbon fiber

The carbon fiber chopped strand are based on the polyacrylonitrile fiber as the raw material. Via carbonization, special surface treatment, mechanical grinding, sieving and drying.
It is stable, electrical conductive, self-lubricating and reinforcing. Because of that It can composite with resin ,plastic, metal, rubber and so on. So It can reinforce the strength and wear resistance of the materials.

Chopped carbon fiber
It can also be commonly compounded with general engineering thermoplastics (e.g., PC, Nylon, etc.) and high-temperature thermoplastic resins (e.g, PEEK, PEI, etc.), the resulting composite offers industry-leading high strength-to-weight and stiffness-to-weight ratios.

Now It is used in many fields. For examples: Electronic chips, conducting plate, conducting floor, Electronic machinery, anti-static industries, anti-static filter, defense industry, building insulation, chemical.

CFRP are composite materials. In this case the composite consists of two parts: a matrix and a reinforcement. In CFRP the reinforcement is carbon fiber, which provides its strength. The matrix is usually a polymer resin, such as epoxy, to bind the reinforcements together. Because CFRP consists of two distinct elements, the material properties depend on these two elements.
Reinforcement gives CFRP its strength and rigidity, measured by stress and elastic modulus respectively. Unlike isotropic materials like steel and aluminum, CFRP has directional strength properties. The properties of CFRP depend on the layouts of the carbon fiber and the proportion of the carbon fibers relative to the polymer. The two different equations governing the net elastic modulus of composite materials using the properties of the carbon fibers and the polymer matrix can also be applied to carbon fiber reinforced plastics
below is the our products in the application of carbon fiber reinforced plastics

Thermoplastic carbon fiber particles with PI/ PEEK

Advantage：High strength, high modulus, electrical conductivity
Usage: EMI shielding, Antistatic, reinforcement the engineering plastic

Chopped carbon fiber

Material	Carbon fiber & PI/PEEK
Carbon fiber Content (%)	97%
PI/PEEK content(%)	2.5-3
Water Content(%)	<0.3
Length	6mm
Thermal stability of surface treatment	350℃ - 450 ℃
Recommended use	Nylon6/66, PPO, PPS, PEI, PES, PPA, PEEK, PA10T, PEKK, PPS，PC, PI, PEEK

Product detail pictures:

Related Product Guide:

As for competitive charges, we believe that you will be searching far and wide for anything that can beat us. We will state with absolute certainty that for such excellent at such charges we have been the lowest around for OEM Supply Carbon Fiber Plate - Plastic reinforcement chopped carbon fiber – WANHOO , The product will supply to all over the world, such as: Juventus, Paris, Casablanca, We are committed to meet all your needs and solve any technical problems you may encounter with your industrial components. Our exceptional products and vast knowledge of technology makes us the preferred choice for our customers.

30mm Carbon Fiber Tube