Newly Arrival Carbon Fiber Look Plastic Sheets - Plastic reinforcement chopped carbon fiber – WANHOO
Newly Arrival Carbon Fiber Look Plastic Sheets - Plastic reinforcement chopped carbon fiber – WANHOO Detail:
Chopped carbon fiber
The carbon fiber chopped strand are based on the polyacrylonitrile fiber as the raw material. Via carbonization, special surface treatment, mechanical grinding, sieving and drying.
It is stable, electrical conductive, self-lubricating and reinforcing. Because of that It can composite with resin ,plastic, metal, rubber and so on. So It can reinforce the strength and wear resistance of the materials.
It can also be commonly compounded with general engineering thermoplastics (e.g., PC, Nylon, etc.) and high-temperature thermoplastic resins (e.g, PEEK, PEI, etc.), the resulting composite offers industry-leading high strength-to-weight and stiffness-to-weight ratios.
Now It is used in many fields. For examples: Electronic chips, conducting plate, conducting floor, Electronic machinery, anti-static industries, anti-static filter, defense industry, building insulation, chemical.
CFRP are composite materials. In this case the composite consists of two parts: a matrix and a reinforcement. In CFRP the reinforcement is carbon fiber, which provides its strength. The matrix is usually a polymer resin, such as epoxy, to bind the reinforcements together. Because CFRP consists of two distinct elements, the material properties depend on these two elements.
Reinforcement gives CFRP its strength and rigidity, measured by stress and elastic modulus respectively. Unlike isotropic materials like steel and aluminum, CFRP has directional strength properties. The properties of CFRP depend on the layouts of the carbon fiber and the proportion of the carbon fibers relative to the polymer. The two different equations governing the net elastic modulus of composite materials using the properties of the carbon fibers and the polymer matrix can also be applied to carbon fiber reinforced plastics
below is the our products in the application of carbon fiber reinforced plastics
Thermoplastic carbon fiber particles with PI/ PEEK
Advantage：High strength, high modulus, electrical conductivity
Usage: EMI shielding, Antistatic, reinforcement the engineering plastic
| Material | Carbon fiber & PI/PEEK |
| Carbon fiber Content (%) | 97% |
| PI/PEEK content(%) | 2.5-3 |
| Water Content(%) | <0.3 |
| Length | 6mm |
| Thermal stability of surface treatment | 350℃ - 450 ℃ |
| Recommended use | Nylon6/66, PPO, PPS, PEI, PES, PPA, PEEK, PA10T, PEKK, PPS，PC, PI, PEEK |
Product detail pictures:
Related Product Guide:
As for aggressive rates, we believe that you will be searching far and wide for anything that can beat us. We can easily state with absolute certainty that for such good quality at such charges we are the lowest around for Newly Arrival Carbon Fiber Look Plastic Sheets - Plastic reinforcement chopped carbon fiber – WANHOO , The product will supply to all over the world, such as: Mauritius, Albania, Ecuador, You can always find the solutions you have to have in our company! Welcome to inquire us about our product and anything we know and we can help in auto spare parts. We have been looking forward to work with you for a win-win situation.
By Jonathan from Portugal - 2018.09.23 18:44
The company can think what our think, the urgency of urgency to act in the interests of our position, can be said this is a responsible company, we had a happy cooperation!
By Honorio from Munich - 2018.06.18 17:25
