products

products

Manufacturing Companies for Carbon Fiber Automotive - Fabrication of prepreg- Carbon fiber raw material – WANHOO

short description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our solutions are widely regarded and trustworthy by consumers and may meet continually modifying financial and social requirements for Short Cut Carbon Fiber, 12mm Carbon Tube, Fabric Carbon Fiber, We attend seriously to produce and behave with integrity, and because of the favor of clients in your house and abroad in the xxx industry.
Manufacturing Companies for Carbon Fiber Automotive - Fabrication of prepreg- Carbon fiber raw material – WANHOO Detail:

Fabrication of prepreg

Carbon fiber prepreg is composed of continuous long fiber and uncured resin. It is the most commonly used raw material form for making high-performance composites. Prepreg cloth is composed of a series of fiber bundles containing impregnated resin. The fiber bundle is first assembled into the required content and width, and then the fibers are evenly separated through the fiber frame. At the same time, the resin is heated and coated on the upper and lower release paper. The fiber and the upper and lower release paper coated with resin are introduced into the roller at the same time. The fiber is located between the upper and lower release paper, and the resin is evenly distributed between the fibers by the pressure of the roller. After the resin impregnated fiber is cooled or dried, it is rolled into a reel shape by a coiler. The resin impregnated fiber surrounded by upper and lower release paper is called carbon fiber prepreg. The rolled prepreg needs to be gelatinized to the stage of partial reaction under the controlled temperature and humidity environment. At this time, the resin is solid, which is called B-stage.

Generally, when making carbon fiber prepreg cloth, the resin adopts two types. One is to directly heat the resin to reduce its viscosity and facilitate uniform distribution among the fibers, which is called hot melt adhesive method. The other is to melt the resin into the flux to reduce the viscosity, and then heat it after the resin is impregnated with fiber to volatilize the flux, which is called flux method. In the process of hot melt adhesive method, the resin content is easy to control, the drying step can be omitted, and there is no residual flux, but the resin viscosity is high, which is easy to cause fiber deformation when impregnating fiber braids. Solvent method has low investment cost and simple process, but the use of flux is easy to remain in the prepreg, which affects the strength of the final composite and causes environmental pollution.

The types of carbon fiber prepreg cloth include unidirectional carbon fiber prepreg cloth and woven carbon fiber prepreg cloth. Unidirectional carbon fiber prepreg cloth has the greatest strength in the fiber direction and is usually used for laminated plates combined in different directions, while woven carbon fiber prepreg cloth has different weaving methods, and its strength is about the same in both directions, so it can be applied to different structures.

we can provide with carbon fiber prepreg according to your requirements

Storage of prepreg

The resin of carbon fiber prepreg is in the stage of partial reaction, and will continue to react and cure at room temperature. It usually needs to be stored in a low temperature environment. The time that carbon fiber prepreg can be stored at room temperature is called storage cycle. Generally, if there is no low-temperature storage equipment, the production amount of prepreg must be controlled within the storage cycle and can be used up.


Product detail pictures:

Manufacturing Companies for Carbon Fiber Automotive - Fabrication of prepreg- Carbon fiber raw material – WANHOO detail pictures


Related Product Guide:

We believe in: Innovation is our soul and spirit. Quality is our life. Customer need is our God for Manufacturing Companies for Carbon Fiber Automotive - Fabrication of prepreg- Carbon fiber raw material – WANHOO , The product will supply to all over the world, such as: Muscat, Kenya, Manchester, We aim to become the modern enterprise with the commercial ideal of "Sincerity and confidence" and with the aim of "Offering customers the most sincere services and best quality products". We sincerely ask for your unchanged support and appreciate your kind advice and guidance.
  • We have been looking for a professional and responsible supplier, and now we find it.
    5 Stars By Lisa from Birmingham - 2017.07.07 13:00
    As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
    5 Stars By Pearl Permewan from Casablanca - 2018.11.22 12:28
    Write your message here and send it to us