High Quality for Carbon Fiber Prepreg - Carbon fiber felt Carbon fiber fire blanket – WANHOO
High Quality for Carbon Fiber Prepreg - Carbon fiber felt Carbon fiber fire blanket – WANHOO Detail:
Chopped carbon fiber
The carbon fiber chopped strand are based on the polyacrylonitrile fiber as the raw material. Via carbonization, special surface treatment, mechanical grinding, sieving and drying.
It is stable, electrical conductive, self-lubricating and reinforcing. Because of that It can composite with resin ,plastic, metal, rubber and so on. So It can reinforce the strength and wear resistance of the materials.
It can also be commonly compounded with general engineering thermoplastics (e.g., PC, Nylon, etc.) and high-temperature thermoplastic resins (e.g, PEEK, PEI, etc.), the resulting composite offers industry-leading high strength-to-weight and stiffness-to-weight ratios.
Now It is used in many fields. For examples: Electronic chips, conducting plate, conducting floor, Electronic machinery, anti-static industries, anti-static filter, defense industry, building insulation, chemical.
CFRP are composite materials. In this case the composite consists of two parts: a matrix and a reinforcement. In CFRP the reinforcement is carbon fiber, which provides its strength. The matrix is usually a polymer resin, such as epoxy, to bind the reinforcements together. Because CFRP consists of two distinct elements, the material properties depend on these two elements.
Reinforcement gives CFRP its strength and rigidity, measured by stress and elastic modulus respectively. Unlike isotropic materials like steel and aluminum, CFRP has directional strength properties. The properties of CFRP depend on the layouts of the carbon fiber and the proportion of the carbon fibers relative to the polymer. The two different equations governing the net elastic modulus of composite materials using the properties of the carbon fibers and the polymer matrix can also be applied to carbon fiber reinforced plastics
below is the our products in the application of carbon fiber reinforced plastics
Thermoplastic carbon fiber particles with PI/ PEEK
Advantage：High strength, high modulus, electrical conductivity
Usage: EMI shielding, Antistatic, reinforcement the engineering plastic
| Material | Carbon fiber & PI/PEEK |
| Carbon fiber Content (%) | 97% |
| PI/PEEK content(%) | 2.5-3 |
| Water Content(%) | <0.3 |
| Length | 6mm |
| Thermal stability of surface treatment | 350℃ - 450 ℃ |
| Recommended use | Nylon6/66, PPO, PPS, PEI, PES, PPA, PEEK, PA10T, PEKK, PPS，PC, PI, PEEK |
Product detail pictures:
Related Product Guide:
We've been convinced that with joint efforts, the enterprise between us will bring us mutual benefits. We are able to assure you product or service quality and aggressive cost for High Quality for Carbon Fiber Prepreg - Carbon fiber felt Carbon fiber fire blanket – WANHOO , The product will supply to all over the world, such as: Rome, Ghana, Zimbabwe, We can give our clients absolute advantages in product quality and cost control, and we have full range of molds from up to one hundred of factories. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation.
By Muriel from Poland - 2018.05.22 12:13
Product variety is complete, good quality and inexpensive, the delivery is fast and transport is security, very good, we are happy to cooperate with a reputable company!
By Lesley from panama - 2017.01.28 18:53
