Best Factory Outlets Impregnated Carbon Fiber - Plastic reinforcement chopped carbon fiber – WANHOO Manufacturer and Factory

Factory Outlets Impregnated Carbon Fiber - Plastic reinforcement chopped carbon fiber – WANHOO

short description:

Product Detail

Product Tags

Feedback (2)

All we do is usually connected with our tenet " Customer to start with, Rely on initial, devoting on the food packaging and environmental protection for Low Temp Prepreg Carbon Fiber, Thermoplastic Panels, Carbon Fiber Plastic Sheet, With advantage of industry management, the company has always been committed to supporting customers to become the market leader in their respective industries.

Factory Outlets Impregnated Carbon Fiber - Plastic reinforcement chopped carbon fiber – WANHOO Detail:

Chopped carbon fiber

The carbon fiber chopped strand are based on the polyacrylonitrile fiber as the raw material. Via carbonization, special surface treatment, mechanical grinding, sieving and drying.
It is stable, electrical conductive, self-lubricating and reinforcing. Because of that It can composite with resin ,plastic, metal, rubber and so on. So It can reinforce the strength and wear resistance of the materials.

Chopped carbon fiber
It can also be commonly compounded with general engineering thermoplastics (e.g., PC, Nylon, etc.) and high-temperature thermoplastic resins (e.g, PEEK, PEI, etc.), the resulting composite offers industry-leading high strength-to-weight and stiffness-to-weight ratios.

Now It is used in many fields. For examples: Electronic chips, conducting plate, conducting floor, Electronic machinery, anti-static industries, anti-static filter, defense industry, building insulation, chemical.

CFRP are composite materials. In this case the composite consists of two parts: a matrix and a reinforcement. In CFRP the reinforcement is carbon fiber, which provides its strength. The matrix is usually a polymer resin, such as epoxy, to bind the reinforcements together. Because CFRP consists of two distinct elements, the material properties depend on these two elements.
Reinforcement gives CFRP its strength and rigidity, measured by stress and elastic modulus respectively. Unlike isotropic materials like steel and aluminum, CFRP has directional strength properties. The properties of CFRP depend on the layouts of the carbon fiber and the proportion of the carbon fibers relative to the polymer. The two different equations governing the net elastic modulus of composite materials using the properties of the carbon fibers and the polymer matrix can also be applied to carbon fiber reinforced plastics
below is the our products in the application of carbon fiber reinforced plastics

Thermoplastic carbon fiber particles with PI/ PEEK

Advantage：High strength, high modulus, electrical conductivity
Usage: EMI shielding, Antistatic, reinforcement the engineering plastic

Chopped carbon fiber

Material	Carbon fiber & PI/PEEK
Carbon fiber Content (%)	97%
PI/PEEK content(%)	2.5-3
Water Content(%)	<0.3
Length	6mm
Thermal stability of surface treatment	350℃ - 450 ℃
Recommended use	Nylon6/66, PPO, PPS, PEI, PES, PPA, PEEK, PA10T, PEKK, PPS，PC, PI, PEEK

Product detail pictures:

Related Product Guide:

We always do the job to be a tangible group making sure that we can provide you with the top top quality as well as ideal value for Factory Outlets Impregnated Carbon Fiber - Plastic reinforcement chopped carbon fiber – WANHOO , The product will supply to all over the world, such as: Hongkong, Bangladesh, Grenada, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.

12k Carbon Fiber Tow